User:Saschaelble
"Although the information we release has been verified and shown to work to the best our knowledge, we cant be held accountable for bricked devices or roots gone wrong."
This page will be dedicated to the hardware specifications, descriptions, and information related to: D40-D1 D50-D1 D55-D1 D58-D1 D60-D1
M75-C1
Specs
- Dual Core Cortex A-9 ARM (CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d)
- w/ 1.5GB DDR3 RAM (x3) (K4B4G1646D-BCK0)
- Quad Core GPU
- w/ 0.5GB DDR3 RAM (x4) (NT5CB64M16FP-DH)
- 4GB EMMC (THGBMBG5D1KBAIT)
5x HDMI Component Ethernet Wifi 4k panel
- USB 3.0 (2.0 externally)
Mainboard
Connections / Connectors / Switches
- CN102 - UART (115200 8n1) CPU
- CN203 - UART (115200 8n1) GPU
- CN403 - UART (56700 8n1)
- CN202 - UART (115200 8n1) unknown/nc
- CN211 - SPI
- CN404 - JTAG
- CN6 - USB
- SW401 - Reboot
All UARTS : Pin1->4 = GND, 3.3v, TX, RX
HDMI 4 is a special port, as it has a demuxer chip (74HC4052D) inline of the SDA and SCL lines, with a voltage detect pin on pin #14 to switch between uart0,1,2 and CEC for HDMI
Updates
Vizio uses a custom update method, like on their TV's and Tablets. Specifically the updates are provided thru Update Logic (ULI), and are pulled from the ULI servers, then decrypted. After decryption, the box is booted into recovery, the update is verified (it's a normal CTV update at this point), then installed.
Update History
- 1.3.24 - Initial Factory Version?
- U-Boot 2012.04-sigma-common-00004-g3f6cf79 (Jun 09 2015 - 15:19:12)
- 1.5.16 - Last update
